We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more. Allow
usd
cad
gbp
eur
Surfboard Technology
Lib Technologies is dedicated to hands on board building and riding. We have spent a lifetime surfing, shaping and working with alternative high performance environmentally friendly materials and constructions. Traditional surf construction has always felt too fragile and the building process is toxic and unhealthy for the planet and crafts people... we knew there had to be a better way.
A decade into our “better” surfboard construction journey we continue to improve our process and materials.
ECO IMPACTO 2 features our new pressure treated Hexylite honeycomb panels, G-Glass and Magnesium fiber fused in our plant based Bio Matrix resin system saving weight and improving board response.
Check out all of our models with ECO IMPACTO 2 construction:
DANG DIFFICULT TO DING!
Technologically Tougher
- A lot tougher than your standard PU or epoxy
- Won’t absorb water if you do get a ding
- The ultimate travel board
- Less worry... more fun
environMENTALLY NICER!
Zero Hazardous Waste
- Bio Resin low VOC plant based
- Nitrogen blown blanks non ozone depleting and recyclable
- Radically reduced resin exposure
- Radically reduced sanding steps
- Elimination of industry standard paint brushes, tape and solvents
- Recycled foam offcuts
- Long lasting construction
NITROGEN CELL ECO UPCYCLED FOAM
Strong, Light, Waterproof
- Environmentally friendly non ozone depleting Nitrogen blowing agent
- 25-40% Recycled content
- Won’t absorb water if you do get a ding (Closed cell)
- Elliptical engineered columnar cells provide toughness top to bottom and elasticity in side impact
- 100% of offcuts and shavings recycled into more foam
BIO-MATRIX PLANT BASED RESIN
Strong, Nice and Craftsperson Friendly
- Plant based glycerin chemistry
- Low VOC (shop smells nice)
- Surfs smooth and responsive (High performance)
- Impact resistant and resilient (Lasts a long time)
MAGNESIUM FIBER
Tough & Resiliant
- High impact and break strength fiber
- Great rebound and memory
G+ GLASS
Lightweight Strengthener
- Made to Mike Olson specs, ideal to our process
- Lightweight
- Strong
- Environmentally and craftsperson friendly
QUAD AXIAL G GLASS
Rail Reinforcement
- Four axis fiber strength 0º/90º/45º/45º
- Lightweight
PRESSURE TREATED HEXALITE
Strong, Light & Smooth
- Smooth riding vibration absorption layer
- Impact and ding resistant
- Ultra light weight
LIB-TECH LEASH PLUG
Better Basics!
- 6061 T6 Aircraft aluminum pins
- Lightweight fiber composite cup
LIB TECH FIN BOX SOLUTIONS
Why we use our own fin boxes?!
We faced many obstacles while developing our industry changing ECO IMPACTO 2 LITE construction. Our environmentally nicer dang difficult to ding process is so unique that none of the stock fin boxes from other systems can be used without significant modification. We’re always looking at challenges as opportunity, in that light we put energy into developing our own unique FCS and Futures compatible fin box systems. We think our systems offer upgrades to each system that make them the best boxes in the world!
LIB TECH FOC-II (FCS® compatible)
Our FOC-II fin boxes are compatible with FCS two tab and FCS-II but lighter and offer 5/16” of adjustability in the fin box when using our RRIPs upcycled fins! Available on all models except Pickup Stick 8’ and Terrapin.
LIB TECH FUTURES® COMPATIBLE
Three years ago we developed a unique “high performance” Futures® Compatible system that features set “grub” screws at both ends of the fin box. The rear screw replaces the traditional bar that anchors the trailing end of the fin. You can set the rear screw once and never adjust it and use the front screw to lock the fin in like you do with traditional Futures®. Or you can actually tighten both screws once the fin is in place and lock in both ends for an extra rigid high performance feel. (You will need to slightly loosen the trailing screw and use the front screw as you normally would to get the fin out of the box if you choose to double lock it in). Available on Quiver Killer, Swordfish, Puddle Jumper HP, Rocket Redux.
FUTURES® SINGLE 8” & 10.5" FIN BOXS
We are able to use stock Futures® single fin box with some slight modifications... these work exactly like a traditional Futures® single fin box. 8" Futures® single fin box used on Pickup Stick 7’0", 7'6", 8'0" and Terrapin. 10.5" Futures® single fin box used on Pickup Stick 9' 0".
LIB TECH FOC-II® FIN BOX
Fits FOC-II®, FCS® Two Tab and Lib RRIPs® fins
- Optimized placement for FCS-II®
- RIPPs compatible with 5/16 performance adjustability
- Light and tough
FUTURES® COMPATIBLE FIN BOX
Fits Futures® High Performance Fins
- Double set screw replaces fixed pin
- Operates like a traditional Futures® Box
- Can “performance lock” fins in with both screws
FUTURES® SINGLE 8" & 10.5" FIN BOXS
8" & 10.5" Standard size single fin box
- Fits traditional single fins
FOAM DUST AND OFF CUT RECYCLING
Our amazing Nitrogen Cell foam contains 25-40% recycled material and we are able to recycle 100% of our offcuts and shavings back into foam. (Traditional surfboard scrap foam ends up in the landfill.)
Unused blank tusks and shavings are run through our in-house thermo densification process and turned into high density bricks which are up-cycled back into foam!
1) Tusks and shavings are run through the chopper.
2) Ground up foam is melted and re-extruded into dense bricks.
3) Bricks are palletized and sent off to make more foam!